ADC0V729 4MP WiFi camera floodlight – DC powered (power supply included)
 
When using the ADC-V729:
ADC-V729 camera
24V DC 2A power supply (included)
 
Caution: A 24V DC adapter is different than the standard 12V adapters used for other ADC cameras.
Mounting hardware (included)
Broadband (Cable, DSL, or Fiber Optic) internet connection with router
If the router does not have the WPS button, you will need the case-sensitive SSID (wireless network name) and the network WPA or WEP key (if the encryption is enabled at the router).
A Wi-fi enabled computer or mobile device
 
In the box
In the unit: 
1 set (x2) of M4 7/16 screws to attach the floodlight base to the mounting bracket
1 set (x2) of weatherproof caps to seal the unit after install
Screw bags: 
Multiple screw sizes are included to accommodate multiple junction box and screw hole sizes. Choose which set to use based on your particular install requirements. The following screws are included for mounting: 
(4) #8-32 X 7/8” – for attaching the mounting bracket to the wall/junction box
(4) #8-32 X 1/2” – for attaching the mounting bracket to the wall/junction box
(2) 6-32 X 1”, - for attaching the adapter plate to the mounting bracket
(2) 6-32 X ½ - for attaching the adapter plate to the mounting bracket
(x3) 22-14 AWG wire nuts to connect wires (V729AC only)
Set of wall anchors and screws (V729DC and VC729P only)
Torx screw for microSD card door (VC729P only)
Camera base to mounting bracket grounding wire and nut